It’s late in the night, and you’re deep in slumber when all of a sudden, you hear a loud noise. Running to find the source, you find it’s not Santa, but instead, your garage door spring has snapped and unwound violently.
You might feel like you have the worst luck in the world, but a broken garage door spring is quite common. Like huge steel rubber bands, door springs are designed to carry the weight of a garage door as it opens and closes. So what do you do now?
You don’t have any money saved up, and you can’t afford a new door, so what can you do? The possible solution is to use outside parking, which has to be rented and is also very expensive, so you need to keep in mind and be ready for such occasions.
Of course, your garage door won’t just break like that, but have you ever thought about the expenses you’ll be faced if something like this happens? If you haven’t, you need to turn on your brain and start thinking right now. It takes more than just a few hundred dollars to get your garage door repaired, and you can’t possibly leave your car in a broken garage, can you?
Repair Your Garage Door Springs In 4 Steps
Open the garage so you can use your car
Unless you plan on walking, you probably want to get your car out of the garage. Find the red emergency release cord beneath your door opener and pull on it. This will let you manually lift your garage door. Because your spring is broken, it’s likely your door is going to be heavy, so please be careful.
Identify Your Spring
What kind of spring do you have? Is it Extension or Torsion?
A torsion spring is run across the top of your garage door. It’s wound up and under pressure, which allows it to lift the door.
Extension springs are located on the sides of the door. These stretch like big rubber bands and support the weight of the door.
Find New Springs
Now that you know what type of spring you have, you need to purchase new ones. Where do you buy springs? You can buy them at your nearby hardware store, such as Lowes or online. The cost will vary from a few dollars to over $150, depending on the style of spring.
Put in the new springs
Installing your new door springs isn’t only a lengthy and challenging process, but potentially harmful. Keep in mind, and garage springs are wound and under tension. You need to make sure you have the right tools before even beginning the job. A couple of them you’ll want are:
- two 10 inch vise grips
- adjustable wrench
- two 1/2″ x 18″ winding bars
- socket wrench and sockets
- good lighting
- safety glasses
This is too much work, and I’ll never figure it out!
Many people don’t have the time or inclination to change their broken springs themselves. If you aren’t sure you can handle the project or are afraid of possibly hurting yourself, find a garage door repair in Scottsdale and save yourself the trouble